Hello, creative person! Welcome to my holly leaf tutorial. Like the design it is inspired by, the freehand cloud, it's quick and simple to make, even with the small additions. What I like about this design (apart from being very Christmassy ^_^), is that it combines the use of different tools, it's a great way to practice both freehand and dotting skills. But once again, it's fairly simple. I hope you'll give it a try!
Start with a green basecolor for the holly and let it dry. Use a basecoat underneath if your polish tends to stain.
here). Start each stroke by placing the tip of the brush on the surface and wait till enough polish has dripped off, forming a round starting point. Try to leave enough polish on the brush to do this, but make sure it's not too much either to prevent having a thick, lumpy layer that will take forever to dry.
Tip: If your polish comes with a (big) flat brush, just twist it 90° and use the side. It's easier to make those round edges this way. :-)
It's likely to use a green polish for this task, as the leaf is green. But if you don't own any, a black, brown or blue will work too.
A true Christmas holly isn't complete without its berries! So finish the design by adding a couple of red dots with a dotting tool. Or place a few big glitters or rhinestones instead, for that extra bit of oomph!At last a layer of topcoat, et voilà.
I would absolutely love to see your attempt on my design, so feel free to leave a link to your creation in the comment section!
The polishes I used in this post are OPI Jade Is The New Black, Color Club Artsy Crafty, Janet striper polish #119 and P2 Fever.